104 Ceramic Capacitor
We offer 104 ceramic capacitors, which are commonly used in electronic circuits. The “104” marking indicates a capacitance value of 100,000 picofarads (100 nF or 0.1 microfarads).1 These capacitors are known for their small size, reliability, and cost-effectiveness.2 They find applications in various circuits, including decoupling, filtering, and bypassing.
104 Ceramic Capacitor Value
The “104” marking on a ceramic capacitor indicates a capacitance value of 100,000 picofarads (pF).
This is equivalent to:
- 100 nanofarads (nF)
- 0.1 microfarads (μF)
This value is commonly used in various electronic circuits, particularly for decoupling, filtering, and bypassing applications.
104 Ceramic Capacitor Datasheet
“104” only indicates capacitance: The marking “104” solely signifies a capacitance value of 100,000 picofarads (100 nF or 0.1 microfarads).
Datasheets are specific: Datasheets are always tied to a particular manufacturer and their specific part number for a given capacitor.
To find the datasheet you need:
- Identify the manufacturer: Look for any markings on the capacitor itself (besides “104”) that might indicate the manufacturer (e.g., a logo, abbreviated company name).
- Find the part number: The full part number will be unique to that manufacturer and model.
- Search online: Use a combination of the manufacturer‘s name and the part number to search for the datasheet on their website or through a general electronic component search engine (like Digi-Key, Mouser, or RS Components)
104 Ceramic Capacitor FAQs
what is a 104 ceramic capacitor?
A 104 ceramic capacitor is a type of electronic component used to store electrical charge. The “104” marking on the capacitor indicates its capacitance value. In this case, “104” signifies a capacitance of 100,000 picofarads (pF), which is equivalent to 100 nanofarads (nF) or 0.1 microfarads (μF).
Ceramic capacitors are known for their small size, reliability, and cost-effectiveness. They are widely used in various electronic circuits, including decoupling, filtering, and bypassing applications. Decoupling capacitors help to stabilize power supplies by filtering out high-frequency noise. Filtering capacitors are used to remove unwanted frequencies from signals. Bypassing capacitors provide a low-impedance path for high-frequency signals to ground, preventing them from interfering with other parts of the circuit.
What is the value of 104 on a ceramic capacitor?
The marking “104” on a ceramic capacitor represents a capacitance value. In this coding system, the first two digits (10) signify the significant figures, and the third digit (4) indicates the number of zeros to be added.
Therefore, “104” translates to 10 followed by four zeros, resulting in a capacitance of 100,000 picofarads (pF). This is equivalent to 100 nanofarads (nF) or 0.1 microfarads (μF).
What is the difference between 103 and 104 capacitor?
The primary difference between “103” and “104” ceramic capacitors lies in their capacitance values.
103 Capacitor: This marking signifies a capacitance value of 10,000 picofarads (pF), which is equivalent to 10 nanofarads (nF) or 0.01 microfarads (μF).
104 Capacitor: This marking indicates a capacitance value of 100,000 picofarads (pF), which is equivalent to 100 nanofarads (nF) or 0.1 microfarads (μF).
Essentially, a 104 capacitor has ten times the capacitance of a 103 capacitor.
This difference in capacitance can significantly impact their performance in electronic circuits, particularly in applications like filtering, decoupling, and timing.
What is the maximum voltage of 104 ceramic capacitor?
The maximum voltage of a 104 ceramic capacitor can vary significantly. The “104” marking only indicates its capacitance value (100,000 picofarads or 0.1 microfarads).
Common voltage ratings for 104 ceramic capacitors include 50V, 100V, and even 250V.
To determine the exact voltage rating of a specific capacitor, you’ll need to refer to its marking (if printed on the capacitor itself) or consult the datasheet for that particular component.
